(1) 【Product introduction】
(2) Mini electric hoist, also known as electric hoist, lifting speed can reach 10m/min, the length of the wire rope is 12 meters. In hook, in particular the use of advanced double hook set, greatly increasing the micro electric hoist lifting weight.
(3) 【Product features】
(4) 1, the design is exquisite, the use is convenient;
2, protection class IP54, with thermal protection device;
3, hook design is divided into dynamic loading and static loading of two states;
4, with single-phase power as the power source, 220V household power to operate;
5, with a lightweight wick socket;
360, with a safety hook lock of the 6 degree hook pad;
7, with emergency stop switch and a force off the open limit switch: such as reverse wire rope to ascend, upgrading the motor will stop automatically; when the limit baffle met limit device, electric hoist stopped automatically.
【Using method】
(5) A new installation or after dismantling after the installation of the electric hoist, should first be empty test run several times. But before the installation is not installed, should not pass the test. In use, the absolute prohibition of under the environment does not allow and use more than the rated load and the hourly rated closing times (120). Installation, debugging and maintenance, must be strictly check the limit device is flexible and reliable, when the hook up first limit position, hook shell to the drum shell distance must greater than 50mm (10t 16t 20t must greater than 120 mm). When the hook to the lower limit position, should guarantee the safety of steel wire rope on the drum circle, effective safety ring must be 2 laps more than. Not allowed while pressing the two electric hoist movement in the opposite direction of the switch button.
(6) 【Note】
(7) 1, no electric hoist lifting unloading heavy side, prohibited use of overload.
2, in the use of the process, the operator should always check the wire rope is arbitrary deduction, knotting, drop tank, wear, if there should be ruled out in a timely manner, and to regularly inspect rope guide and limit switch position is safe and reliable.
3, after work, turn off the power switch, cut off the main power supply.